1030373

• Plate And Gasket Kit Only
• Ideal for use with EFI Live, HP Tuners or H&S transmission pressure tuning
• Custom BD valve body separator plate enables the transmission to make up to 250psi line pressure
• Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
• Kit includes separator plate, valve body gaskets, pan gasket, 3 doughnut seals and a check ball
• This kit is for use with custom transmission tuning or an additional module which commands higher line pressure

1030362

Add 150% MORE Torque!

Improve your shift points and pressures!

BD's ProTect68 Trans Pressure Control kit adds up to 56% more torque holding force to stock transmissions like no others can. Kit includes a new designed valve body separator plate and a Pressure Control module that delivers up to 250 PSI clutch apply pressure providing more holding force to prevent clutch slippage. All of this without modifying the transmission pump or removing the transmission. The ProTect 68 Electronic Pressure Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/ engine load. The modules dynamic control ramps up the much larger sweep right up to 250 PSI mainline pressure as needed dependent on engine load which creates turbocharger boost dynamically. This is not accomplished with any other aftermarket engine tuner. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A fresh stock transmission will have the ability to handle up to 400 to 450hp.

For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended. Also available from BD for the 68RFE transmission, Heavy Duty Trans Pan, Triple Torque Force Torque Converters and Build-It rebuild kits.