Bully Dog GT Platinum Diesel Tuner
If you are looking for a Tuner, Gauge Monitoring and Diagnostic Device then this is the unit for you. The GT Platinum Tuner will allow you to add additional horsepower while giving you a digital display allowing you to watch specific engine parameters so as to not affect the longevity of you diesel truck.
Option Available on the GT Platinum
Fog Light/High Beam - Run the fog lights and high beams at the same time
Daytime Running Light – Enable or Disable daytime running lights
Headlight Delay – Set the amount of time that the head lamps remain on after the engine has been turned off
Accessory Delay – Control how long accessory items will remain on after the engine has been turned off and the doors remain closed. Accessory items include the radio, cigarette lighter, ect.
Horn Chirp on Lock – The vehicle horn will sound each time the doors are locked by remote control while this feature is enabled.
Seat Belt Chime – Turn off the seat belt reminder chime
Optical Flash on Lock – The hazard lights will flash each time the doors are locked by a remote control when this feature is enabled.
Pyro 1 & Pyro 2 – Have the option to measure exhaust temperatures (EGT’s) which can be used to set defueling options and also visual warnings allowing you to protect your engine for heat damage.
Initiate DPF Burn-Off – This feature will send a request to the engine computer to start the desoot process of the diesel particulate filter (DPF). Notice – A DPF Burn-Off should only be used if absolutely necessary.
Shift on Fly – Change tuning level while driving.
Unlock Drive Door – The GT tune has the feature to unlock all the vehicles door with one press of the unlock button of your remote control unit.
Transmission Adaptive Learning – Hold, resume and reset transmission adaptive learning (TAL), which changes the way the automatic transmission in the vehicle shifts based on driving habits. To pause or stop the TAL process, choose hold. To continue a pause TAL process, choose resume. To restart and relearn driving habits, choose reset.
Idle Adjust – Enable and select a value for engine idle. This is great feature for keeping voltage up while running auxiliary electronics of PTO option.
Low End Power – Increase throttle sensitivity across the RPM range.
Idle Shutdown Timer – Set the length of time the vehicle will idle until the engine shuts off. This is a great feature to extend the life of the turbo by allowing it to cool down before the engine shuts off.
Tire Size – Correct the speedometer for oversized tires.
TPMS – Change or disable the Tire Pressure Monitoring System (TPMS)
Transmission shift Firmness – Change the shift firmness of your automatic transmission.
If you are looking for a Tuner, Gauge Monitoring and Diagnostic Device then this is the unit for you. The GT Platinum Tuner will allow you to add additional horsepower while giving you a digital display allowing you to watch specific engine parameters so as to not affect the longevity of you diesel truck.
Advertised Horsepower & Torque
Stock Power
Tow/Economy 50hp / 100tq
Performance 75hp / 125tq
Extreme 120hp / 250tq NOTE: These are typical results as per dyno testing. Variations do occur between vehicle applications
Options Available on the GT Platinum
Fog Light/High Beam - Run the fog lights and high beams at the same time
Daytime Running Light – Enable or Disable daytime running lights
Headlight Delay – Set the amount of time that the head lamps remain on after the engine has been turned off
Accessory Delay – Control how long accessory items will remain on after the engine has been turned off and the doors remain closed. Accessory items include the radio, cigarette lighter, ect.
Horn Chirp on Lock – The vehicle horn will sound each time the doors are locked by remote control while this feature is enabled.
Seat Belt Chime – Turn off the seat belt reminder chime
Optical Flash on Lock – The hazard lights will flash each time the doors are locked by a remote control when this feature is enabled.
Pyro 1 & Pyro 2 – Have the option to measure exhaust temperatures (EGT’s) which can be used to set defueling options and also visual warnings allowing you to protect your engine for heat damage.
Initiate DPF Burn-Off – This feature will send a request to the engine computer to start the desoot process of the diesel particulate filter (DPF). Notice – A DPF Burn-Off should only be used if absolutely necessary.
Shift on Fly – Change tuning level while driving.
Unlock Drive Door – The GT tune has the feature to unlock all the vehicles door with one press of the unlock button of your remote control unit.
Transmission Adaptive Learning – Hold, resume and reset transmission adaptive learning (TAL), which changes the way the automatic transmission in the vehicle shifts based on driving habits. To pause or stop the TAL process, choose hold. To continue a pause TAL process, choose resume. To restart and relearn driving habits, choose reset.
Idle Adjust – Enable and select a value for engine idle. This is great feature for keeping voltage up while running auxiliary electronics of PTO option.
Low End Power – Increase throttle sensitivity across the RPM range.
Idle Shutdown Timer – Set the length of time the vehicle will idle until the engine shuts off. This is a great feature to extend the life of the turbo by allowing it to cool down before the engine shuts off.
Tire Size – Correct the speedometer for oversized tires.
TPMS – Change or disable the Tire Pressure Monitoring System (TPMS)
Transmission shift Firmness – Change the shift firmness of your automatic transmission.
