With BD's new T4 exhaust manifold, you can experience a larger runner size, which helps enhance flow through the manifolds with no restriction throughout the RPMs. Cast ports and runners match inlet gasket within 0.03” T4-T6 and center mount can face down or up. This optimizes to a 20° rather than 40° which greatly helps when mounting S400, S500 and other larger turbos.
Created from HiSi Ductile iron, this heavy cast exhaust manifold has 2 drilled and tapped 1/8-NPT ports with heat expansion joints to prevent cracking.
Note: These manifolds are intended for the installation of competition turbos and some modifications to vehicle/engine components will be necessary. Common Turbos with T4 or T6 mounts include: Borg Warner S300 / S400 / S500 Holset HX50 / HX55 / HX60 / HX82 Garrett GT40 / GT42 / GT45 / GT47 / GT55.
On all orders over $99.00
Full Customer Support
Always Low Prices
Safe shopping guarantee
1045995-T4
With BD's new T4 exhaust manifold, you can experience a larger runner size, which helps enhance flow through the manifolds with no restriction throughout the RPMs. Cast ports and runners match inlet gasket within 0.03” T4-T6 and center mount can face down or up.
This optimizes to a 20° rather than 40° which greatly helps when mounting S400, S500 and other larger turbos.
Created from HiSi Ductile iron, this heavy cast exhaust manifold has 2 drilled and tapped 1/8-NPT ports with heat expansion joints to prevent cracking.
Note: These manifolds are intended for the installation of competition turbos and some modifications to vehicle/engine components will be necessary. Common Turbos with T4 or T6 mounts include: Borg Warner S300 / S400 / S500 Holset HX50 / HX55 / HX60 / HX82 Garrett GT40 / GT42 / GT45 / GT47 / GT55.
1045995-T6
With BD's new T6 exhaust manifold, you can experience a larger runner size, which helps enhance flow through the manifolds with no restriction throughout the RPMs. Cast ports and runners match inlet gasket within 0.03” T6 and center mount can face down or up.
This optimizes to a 20° rather than 40° which greatly helps when mounting S400, S500 and other larger turbos.
Created from HiSi Ductile iron, this heavy cast exhaust manifold has 2 drilled and tapped 1/8-NPT ports with heat expansion joints to prevent cracking.
Note: These manifolds are intended for the installation of competition turbos and some modifications to vehicle/engine components will be necessary. Common Turbos with T4 or T6 mounts include: Borg Warner S300 / S400 / S500 Holset HX50 / HX55 / HX60 / HX82 Garrett GT40 / GT42 / GT45 / GT47 / GT55.
1045986-T4
1045986-T6
Truck Applications | Dodge 24V 1998.5-02, Dodge 24V CR 2003-07, Dodge 6.7 2007-09, Dodge 6.7L 2010-12 |
---|---|
SKU | BD T4 & T6 Exhaust Manifolds |
Manufacturer | BD Diesel Performance |
Weight | 30.00 |